Hard Coat Finishes and Textures

Description

Size

Plt/Pcs

Price

UltraFlex is a premium, integrally colored elastomeric finish for use over UltraKote one-coat stucco, Santa Fe Base, Traditional Stucco Cement, Skim- Kote, FoamKote, or other approved base coats. UltraFlex is a ready-mixed aggregated product available in multiple textures, giving the ability to achieve numerous appearances.

Uses: UltraFlex may be used for interior or exterior applications over cementitious and noncementitious base coats, prepared concrete masonry, prepared drywall, prepared painted surfaces or synthetic stucco. UltraFlex has excellent adhesion properties and can assist in efflorescence resistance when surfaces are pretreated with Stucco Conditioner.

80 lbs bag

40/ plt

UltraFinish is an integrally colored elastomeric finish for use over UltraKote one coat stucco, Santa Fe Base, Traditional Stucco Cement, and other approved base coats. UltraFinish is a ready-mixed aggregated product available in multiple textures and colors for maximum design flexibility.

Uses: Ultra Finish may be used for interior or exterior applications over cementitious surfaces such as prepared concrete and masonry or non-cementitious surfaces such as prepared drywall, painted surfaces, or synthetic stucco. UltraFinish has excellent adhesion properties and can assist in efflorescence resistance when surfaces are prepared with Stucco Conditioner.

80 lbs bag

40/ plt

UltraGrey Finish is an elastomeric finish for use over Ultra- Kote one-coat stucco, Santa Fe Base, Traditional Stucco Cement, SkimKote, FoamKote and other approved base coats. UltraFinish is a readymixed aggregated product and is available in multiple sand textures for maximum design flexibility.

Uses: UltraGrey Finish may be used for exterior applications over cementitious or noncementitious and prepared concrete or masonry. Ultra-Grey Finish has excellent adhesion properties and can assist in efflorescence resistance when surfaces are pretreated with Stucco Conditioner.

80 lbs bag

40/ plt

DuraTex is a premium, integrally colored acrylic synthetic stucco for use over UltraKote1, Ultra- Kote Pre-Mix, Santa Fe base, Traditional Stucco Cement, SkimKote, FoamKote or other approved base coats. DuraTex is ready mixed aggregated product available in multiple textures, giving the ability to achieve numerous appearances.

Uses: DuraTex may be used for interior or exterior applications over either cementitious and noncementitious base coats, and prepared: concrete masonry, drywall, painted surfaces, and synthetic stucco. DuraTex has excellent adhesion properties and can assist in efflorescence resistance when surfaces are pretreated with stucco conditioner.

80 lbs bag

40/ plt

Santa Fe Smooth Finish is a proprietary mixture of Portland Cement, hydrated line, silica sand and proprietary additives. Santa Fe Sand Finish will provide a lower pH than a field mix finish.

Uses: Santa Fe Smooth Finish is a Premium ready-mixed smooth finish texture material for use over UltraKote, Santa Fe Base or Traditional Stucco Cement. Santa Fe Smooth Finish can also be used over SkimKote if modified with Ultra Admix. Santa Fe Smooth Finish is not recommended as a finished product and should be covered with StuccoKote, DuraKote or StretchKote. UltraAdmix is recommended to reduce efflorescence, water penetration, cracking, and to increase flexural strength. UltraAdmix will also increase the life of the product in geographic regions where freeze/thaw cycles routinely occurs over prolonged periods.

80 lbs bag

40/ plt

Santa Fe Spanish Texture is a proprietary mixture of Portland Cement, hydrated line, silica sand and proprietary additives.

Uses: Santa Fe Spanish Texture is a Premium ready-mixed material that will achieve most textures (skip, lace, Monterrey weave, cat’s face, etc.). Santa Fe Spanish Texture can also be used to achieve a smooth texture with the use of UltraKote Ultra-Bond.

80 lbs bag

40/ plt

$9.75

Santa Fe Stucco Sand Finish is a proprietary mixture of Portland Cement, hydrated line, silica and/or marble sand and proprietary additives. Santa Fe Sand Finish is available in #16, #20, and #30 grit finishes.

Uses: Santa Fe Stucco Sand Finish is a Premium ready-mixed finish texture material for use over UltraKote, Santa Fe Base or Traditional Stucco Cement. Paint is recommended in lieu of the Santa Fe Sand Finish if consistency in finish color is desired.

Tuscany Accent is a stain used in combination with UltraKote finishes to achieve an “Old World” or “Antique” appearance.

Uses: Tuscany Accent is for interior or exterior applications when the “Old Wrold” or “Antique” look is desired.