Stucco and EIFS Wraps and Flashing
||Price per roll
|TYVEK STUCCO WRAP
(5′ X 200’/ROLL)
Stucco and EIFS Flashing
Fortiflash is engineered to deliver lasting protection against water intrusion in the most demanding environmental conditions. It is the premium self-adhesive waterproof flashing membrane for windows. It is also ideally suited for flashing non-roofing horizontal conditions such as pot shelves, parapets, sill pans and recessed windows.
Its strong adhesion makes it a perfect choice for sealing around common through-wall penetrations such as hose bibs, vents, electrical boxes and exterior lights. Yet, its price makes fortiflash the price/performance solution for the most challenging construction requirements.
Reinforced by a strong cross-laminated high-density polyethylene film, Fortiflash can be installed around protrusions and into the tightest corners without delaminating or tearing.
Its self-sealing rubberized asphalt core stays in place in the most punishing weather conditions. Available in 25 and 40 mil versions, there is a fortiflash designed to fit your needs.
Ensure that the unique water management needs of Stucco facades are covered, without compromising building envelope performance.
Dupont™ Tyvek® Stuccowrap® has an engineered, grooved surface – it’s a Stucco Wrap designed to be installed as a drainage plane behind Stucco Facades and EIFS systems.
How it works
Tyvek® Stuccowrap® helps provide better water management behind Stucco Facades, and reduce the susceptibility to cracking of the scratch-coat. It’s a stucco wrap that can help promote both stronger façades and better-performing wall systems.
A single layer of Tyvek® Stuccowrap® is typically installed over sheathing in direct contact with stucco. Tyvek® is highly inert, and will not react with any of the standard ingredients found in traditional stucco mixtures. This allows it to be used in direct contact with stucco cladding mixtures, in accordance with astm c926-06 standard specification for application of portland cement-based plaster.
It is a Stucco Wrap designed with an engineered, grooved surface for better water management when installed as part of a two layer system.
- Research shows that when stucco is directly applied to Tyvek® StuccoWrap® it is better than Grade D paper at managing hydration and remaining stable during curing
- During the critical early hardening phase, Tyvek® StuccoWrap® helps control moisture distribution in the mix, improving the curing process overall, and resulting in stronger stucco.
Installation is easierTyvek® Stuccowrap® is easy to install. It is pliable, so it wraps around corners with ease, and easily interfaces at joints and over architectural elements. Lightweight, easier to handle and faster to install, Tyvek® Stuccowrap® is available in 5- foot-width rolls.
Black Asphalt Felt Paper
Black felt # 15 asphalt paper is a sheet material impregnated with asphalt used in building construction.
Felt paper is the base material used to make shingles and roll roofing. Typical uses of felt paper are as an underlay beneath other building materials, particularly roofing and siding material. The purpose is to provide secondary weather protection.paper provides protection from resins in some sheathing materials and cushions unevenness. The paper also sheds water, which penetrates the roof covering from an ordinary leak, a leak from wind-driven rain or snow, and wind damage.
Buy your Stucco and EIFS Wraps and Flashing from Cross Country Supply, Home of the EIFS Depot. Call us today 866.375.9510